This feedback will let you trigger a play on a target MMRadioSignal (usually used by a MMRadioBroadcaster to emit a value that can then be listened to by MMRadioReceivers. From this feedback you can also specify a duration, timescale and multiplier. More...

Inheritance diagram for MoreMountains.Feedbacks.MMFeedbackRadioSignal:

Public Attributes
MMRadioSignal	TargetSignal

MMRadioSignal.TimeScales	TimeScale = MMRadioSignal.TimeScales.Unscaled

float	Duration = 1f
	the duration of the shake, in seconds More...

float	GlobalMultiplier = 1f
	a global multiplier to apply to the end result of the combination More...

Public Attributes inherited from MoreMountains.Feedbacks.MMFeedback
bool	Active = true
	whether or not this feedback is active More...

string	Label = "MMFeedback"
	the name of this feedback to display in the inspector More...

float	Chance = 100f
	the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc) More...

MMFeedbackTiming	Timing
	a number of timing-related values (delay, repeat, etc) More...

bool	DebugActive = false
	whether or not this feedback is in debug mode More...

Protected Member Functions
override void	CustomPlayFeedback (Vector3 position, float attenuation=1.0f)
	sets the inspector color for this feedback More...

Protected Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual IEnumerator	PlayCoroutine (Vector3 position, float attenuation=1.0f)
	An internal coroutine delaying the initial play of the feedback More...

virtual void	RegularPlay (Vector3 position, float attenuation=1.0f)
	Triggers delaying coroutines if needed More...

virtual IEnumerator	InfinitePlay (Vector3 position, float attenuation=1.0f)
	Internal coroutine used for repeated play without end More...

virtual IEnumerator	RepeatedPlay (Vector3 position, float attenuation=1.0f)
	Internal coroutine used for repeated play More...

virtual IEnumerator	SequenceCoroutine (Vector3 position, float attenuation=1.0f)
	A coroutine used to play this feedback on a sequence More...

virtual void	CustomInitialization (GameObject owner)
	This method describes all custom initialization processes the feedback requires, in addition to the main Initialization method More...

virtual void	CustomStopFeedback (Vector3 position, float attenuation=1.0f)
	This method describes what happens when the feedback gets stopped More...

virtual void	CustomReset ()
	This method describes what happens when the feedback gets reset More...

Properties
override float	FeedbackDuration `[get]`
	the duration of this feedback is the duration of the light, or 0 if instant More...

Properties inherited from MoreMountains.Feedbacks.MMFeedback
GameObject	Owner `[get, set]`
	the Owner of the feedback, as defined when calling the Initialization method More...

virtual YieldInstruction	Pause `[get]`
	set this to true if your feedback should pause the execution of the feedback sequence More...

virtual bool	HoldingPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run More...

virtual bool	LooperPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	LooperStart `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	InCooldown `[get]`
	returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise More...

float	FeedbackTime `[get]`
	the time (or unscaled time) based on the selected Timing settings More...

float	FeedbackDeltaTime `[get]`
	the delta time (or unscaled delta time) based on the selected Timing settings More...

virtual float	FeedbackStartedAt `[get]`

virtual float	FeedbackDuration `[get]`

virtual bool	FeedbackPlaying `[get]`
	whether or not this feedback is playing right now More...

Additional Inherited Members
Public Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual void	Initialization (GameObject owner)
	Initializes the feedback and its timing related variables More...

virtual void	Play (Vector3 position, float attenuation=1.0f)
	Plays the feedback More...

virtual void	Stop (Vector3 position, float attenuation=1.0f)
	Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations More...

virtual void	ResetFeedback ()
	Calls this feedback's custom reset More...

virtual void	SetSequence (MMSequence newSequence)
	Use this method to change this feedback's sequence at runtime More...

virtual void	SetDelayBetweenRepeats (float delay)
	Use this method to specify a new delay between repeats at runtime More...

virtual void	SetInitialDelay (float delay)
	Use this method to specify a new initial delay at runtime More...

Protected Attributes inherited from MoreMountains.Feedbacks.MMFeedback
WaitForSeconds	_initialDelayWaitForSeconds

WaitForSeconds	_betweenDelayWaitForSeconds

WaitForSeconds	_sequenceDelayWaitForSeconds

float	_lastPlayTimestamp = -1f

int	_playsLeft

bool	_initialized = false

Coroutine	_playCoroutine

Coroutine	_infinitePlayCoroutine

Coroutine	_sequenceCoroutine

Coroutine	_repeatedPlayCoroutine

int	_sequenceTrackID = 0

float	_beatInterval

bool	BeatThisFrame = false

int	LastBeatIndex = 0

int	CurrentSequenceIndex = 0

float	LastBeatTimestamp = 0f

Detailed Description

This feedback will let you trigger a play on a target MMRadioSignal (usually used by a MMRadioBroadcaster to emit a value that can then be listened to by MMRadioReceivers. From this feedback you can also specify a duration, timescale and multiplier.

Member Function Documentation

◆ CustomPlayFeedback()

override void MoreMountains.Feedbacks.MMFeedbackRadioSignal.CustomPlayFeedback	(	Vector3	position,
		float	attenuation = `1.0f`
	)

protectedvirtual

sets the inspector color for this feedback

On Play we set the values on our target signal and make it start shaking its level

Parameters

position
attenuation

Implements MoreMountains.Feedbacks.MMFeedback.

Member Data Documentation

◆ Duration

float MoreMountains.Feedbacks.MMFeedbackRadioSignal.Duration = 1f

the duration of the shake, in seconds

◆ GlobalMultiplier

float MoreMountains.Feedbacks.MMFeedbackRadioSignal.GlobalMultiplier = 1f

a global multiplier to apply to the end result of the combination

◆ TargetSignal

MMRadioSignal MoreMountains.Feedbacks.MMFeedbackRadioSignal.TargetSignal

◆ TimeScale

MMRadioSignal.TimeScales MoreMountains.Feedbacks.MMFeedbackRadioSignal.TimeScale = MMRadioSignal.TimeScales.Unscaled

Property Documentation

◆ FeedbackDuration

override float MoreMountains.Feedbacks.MMFeedbackRadioSignal.FeedbackDuration

get

the duration of this feedback is the duration of the light, or 0 if instant

The documentation for this class was generated from the following file:

F:/Github/Store/MMFeedbacksStore/Assets/MMFeedbacks/MMFeedbacks/MMFeedbacksForThirdParty/MMTools/MMRadio/MMFeedbackRadioSignal.cs

Public Attributes

Protected Member Functions

Properties

Additional Inherited Members