Inheritance diagram for MoreMountains.Feedbacks.MMFeedbackMaterial:

Public Types
enum	Methods { Methods.Sequential, Methods.Random }
	sets the inspector color for this feedback More...

Public Attributes
Renderer	TargetRenderer
	the renderer to change material on More...

Methods	Method
	the selected method More...

bool	Loop = true
	whether or not the sequential order should loop More...

bool	AlwaysNewMaterial = true
	whether or not to always pick a new material in random mode More...

int	InitialIndex = 0
	the initial index to start with More...

List< Material >	Materials
	the list of materials to pick from More...

Public Attributes inherited from MoreMountains.Feedbacks.MMFeedback
bool	Active = true
	whether or not this feedback is active More...

string	Label = "MMFeedback"
	the name of this feedback to display in the inspector More...

float	Chance = 100f
	the chance of this feedback happening (in percent : 100 : happens all the time, 0 : never happens, 50 : happens once every two calls, etc) More...

MMFeedbackTiming	Timing
	a number of timing-related values (delay, repeat, etc) More...

bool	DebugActive = false
	whether or not this feedback is in debug mode More...

Protected Member Functions
override void	CustomInitialization (GameObject owner)
	On init, grabs the current index More...

override void	CustomPlayFeedback (Vector3 position, float attenuation=1.0f)
	On play feedback, we change the material if possible More...

virtual int	DetermineNextIndex ()
	Determines the new material to pick More...

Protected Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual IEnumerator	PlayCoroutine (Vector3 position, float attenuation=1.0f)
	An internal coroutine delaying the initial play of the feedback More...

virtual void	RegularPlay (Vector3 position, float attenuation=1.0f)
	Triggers delaying coroutines if needed More...

virtual IEnumerator	InfinitePlay (Vector3 position, float attenuation=1.0f)
	Internal coroutine used for repeated play without end More...

virtual IEnumerator	RepeatedPlay (Vector3 position, float attenuation=1.0f)
	Internal coroutine used for repeated play More...

virtual IEnumerator	SequenceCoroutine (Vector3 position, float attenuation=1.0f)
	A coroutine used to play this feedback on a sequence More...

virtual void	CustomStopFeedback (Vector3 position, float attenuation=1.0f)
	This method describes what happens when the feedback gets stopped More...

virtual void	CustomReset ()
	This method describes what happens when the feedback gets reset More...

Protected Attributes
int	_currentIndex

Protected Attributes inherited from MoreMountains.Feedbacks.MMFeedback
WaitForSeconds	_initialDelayWaitForSeconds

WaitForSeconds	_betweenDelayWaitForSeconds

WaitForSeconds	_sequenceDelayWaitForSeconds

float	_lastPlayTimestamp = -1f

int	_playsLeft

bool	_initialized = false

Coroutine	_playCoroutine

Coroutine	_infinitePlayCoroutine

Coroutine	_sequenceCoroutine

Coroutine	_repeatedPlayCoroutine

int	_sequenceTrackID = 0

float	_beatInterval

bool	BeatThisFrame = false

int	LastBeatIndex = 0

int	CurrentSequenceIndex = 0

float	LastBeatTimestamp = 0f

Additional Inherited Members
Public Member Functions inherited from MoreMountains.Feedbacks.MMFeedback
virtual void	Initialization (GameObject owner)
	Initializes the feedback and its timing related variables More...

virtual void	Play (Vector3 position, float attenuation=1.0f)
	Plays the feedback More...

virtual void	Stop (Vector3 position, float attenuation=1.0f)
	Stops all feedbacks from playing. Will stop repeating feedbacks, and call custom stop implementations More...

virtual void	ResetFeedback ()
	Calls this feedback's custom reset More...

virtual void	SetSequence (MMSequence newSequence)
	Use this method to change this feedback's sequence at runtime More...

virtual void	SetDelayBetweenRepeats (float delay)
	Use this method to specify a new delay between repeats at runtime More...

virtual void	SetInitialDelay (float delay)
	Use this method to specify a new initial delay at runtime More...

Properties inherited from MoreMountains.Feedbacks.MMFeedback
GameObject	Owner `[get, set]`
	the Owner of the feedback, as defined when calling the Initialization method More...

virtual YieldInstruction	Pause `[get]`
	set this to true if your feedback should pause the execution of the feedback sequence More...

virtual bool	HoldingPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run More...

virtual bool	LooperPause `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	LooperStart `[get]`
	if this is true, this feedback will wait until all previous feedbacks have run, then run all previous feedbacks again More...

virtual bool	InCooldown `[get]`
	returns true if this feedback is in cooldown at this time (and thus can't play), false otherwise More...

float	FeedbackTime `[get]`
	the time (or unscaled time) based on the selected Timing settings More...

float	FeedbackDeltaTime `[get]`
	the delta time (or unscaled delta time) based on the selected Timing settings More...

virtual float	FeedbackStartedAt `[get]`

virtual float	FeedbackDuration `[get]`

virtual bool	FeedbackPlaying `[get]`
	whether or not this feedback is playing right now More...

Member Enumeration Documentation

◆ Methods

enum MoreMountains.Feedbacks.MMFeedbackMaterial.Methods

strong

sets the inspector color for this feedback

the possible methods to switch materials

Enumerator
Sequential
Random

Member Function Documentation

◆ CustomInitialization()

override void MoreMountains.Feedbacks.MMFeedbackMaterial.CustomInitialization ( GameObject owner )

protectedvirtual

On init, grabs the current index

Parameters

owner

Reimplemented from MoreMountains.Feedbacks.MMFeedback.

◆ CustomPlayFeedback()

override void MoreMountains.Feedbacks.MMFeedbackMaterial.CustomPlayFeedback	(	Vector3	position,
		float	attenuation = `1.0f`
	)

protectedvirtual

On play feedback, we change the material if possible

Parameters

position
attenuation

Implements MoreMountains.Feedbacks.MMFeedback.

◆ DetermineNextIndex()

virtual int MoreMountains.Feedbacks.MMFeedbackMaterial.DetermineNextIndex ( )

protectedvirtual

Determines the new material to pick

Returns

Member Data Documentation

◆ _currentIndex

int MoreMountains.Feedbacks.MMFeedbackMaterial._currentIndex

protected

◆ AlwaysNewMaterial

bool MoreMountains.Feedbacks.MMFeedbackMaterial.AlwaysNewMaterial = true

whether or not to always pick a new material in random mode

◆ InitialIndex

int MoreMountains.Feedbacks.MMFeedbackMaterial.InitialIndex = 0

the initial index to start with

◆ Loop

bool MoreMountains.Feedbacks.MMFeedbackMaterial.Loop = true

whether or not the sequential order should loop

◆ Materials

List<Material> MoreMountains.Feedbacks.MMFeedbackMaterial.Materials

the list of materials to pick from

◆ Method

Methods MoreMountains.Feedbacks.MMFeedbackMaterial.Method

the selected method

◆ TargetRenderer

Renderer MoreMountains.Feedbacks.MMFeedbackMaterial.TargetRenderer

the renderer to change material on

The documentation for this class was generated from the following file:

F:/Github/Store/MMFeedbacksStore/Assets/MMFeedbacks/MMFeedbacks/MMFeedbacks/Feedbacks/MMFeedbackMaterial.cs

Public Types

Public Attributes

Protected Member Functions

Protected Attributes

Additional Inherited Members

Member Enumeration Documentation

◆ Methods

Member Function Documentation

◆ CustomInitialization()

◆ CustomPlayFeedback()

◆ DetermineNextIndex()

Member Data Documentation

◆ _currentIndex

◆ AlwaysNewMaterial

◆ InitialIndex

◆ Loop

◆ Materials

◆ Method

◆ TargetRenderer